Your wishlist is now on collections - Saved Products
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share
Quicksilver 35-866340Q03 Mercruiser Oil Filter 866340Q03-C
Quicksilver Mercury/Mercruiser 35-866340Q03 Oil FilterThe Mercury/Mercruiser Quicksilver 866340Q03 Oil Filter fits all Mercury MerCruiser and Mercury inboard engines, except V-6 models with the filter mounted on the engine block. This oil filter features a metal shell that is over 50% thicker than conventional filters with a durable pai…
Quicksilver Mercury/Mercruiser 35-866340Q03 Oil FilterThe Mercury/Mercruiser Quicksilver 866340Q03 Oil Filter fits all Mercury MerCruiser and Mercury inboard engines, except V-6 models with the filter mounted on the engine block. This oil filter features a metal shell that is over 50% thicker than conventional filters with a durable paint finish to resist corrosion even in saltwater environments.Using the Quicksilver Mercruiser Oil Filter, Wholesale Marine recommends that you change your oil filter after every 100 hours of normal use or minimally once per season.Continued use of the Quicksilver Mercruiser Oil Filter at every oil change will help to extend the service life of your boat engine.Application: Mercury MerCruiser GM in-line 4-cylinder and 6-cylinder engines; Mercury MerCruiser GM V-8 engines; Mercury MerCruiser GM V-6 and V-8 engines with remote oil filter; Crusader engines (replaces 201104); Chris Craft engines (283, 305, 307, 250, 454); OMC GM engines (replaces #502901 and 502902) except for filters mounted on remote brackets; Pleasurecraft (PCM) GM engines (replaces R077002); Volvo-Penta (replaces 835440-9); Mercury/Mercruiser Quicksilver 866340Q03 Oil Filter Replaces: Mercruiser; 35-802885Q; 32716; 866340Q02; 866340K01; Sierra; 18-7824-2; 18-7876-1; EMP; 35-57801; Crusader; 201104; OMC; 502901; 502902; Pleasurecraft; R077002; Volvo Penta; 835440-9; Quicksilver 866340Q03 Oil Filter Installation InstructionsUnscrew old filter and clean mounting base. Be sure old gasket is removed from mounting base; Apply a thin coat of oil to the filter gasket. Make sure the gasket is seated properly in base of the Quicksilver Mercruiser Oil Filter.; Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn; Use an acceptable filter wrench if necessary. Do NOT exceed 1 - 1-1/4 turn; Refill the crankcase and run the engine while checking for leaks; Check oil level;
Description
Quicksilver Mercury/Mercruiser 35-866340Q03 Oil FilterThe Mercury/Mercruiser Quicksilver 866340Q03 Oil Filter fits all Mercury MerCruiser and Mercury inboard engines, except V-6 models with the filter mounted on the engine block. This oil filter features a metal shell that is over 50% thicker than conventional filters with a durable paint finish to resist corrosion even in saltwater environments.Using the Quicksilver Mercruiser Oil Filter, Wholesale Marine recommends that you change your oil filter after every 100 hours of normal use or minimally once per season.Continued use of the Quicksilver Mercruiser Oil Filter at every oil change will help to extend the service life of your boat engine.Application: Mercury MerCruiser GM in-line 4-cylinder and 6-cylinder engines; Mercury MerCruiser GM V-8 engines; Mercury MerCruiser GM V-6 and V-8 engines with remote oil filter; Crusader engines (replaces 201104); Chris Craft engines (283, 305, 307, 250, 454); OMC GM engines (replaces #502901 and 502902) except for filters mounted on remote brackets; Pleasurecraft (PCM) GM engines (replaces R077002); Volvo-Penta (replaces 835440-9); Mercury/Mercruiser Quicksilver 866340Q03 Oil Filter Replaces: Mercruiser; 35-802885Q; 32716; 866340Q02; 866340K01; Sierra; 18-7824-2; 18-7876-1; EMP; 35-57801; Crusader; 201104; OMC; 502901; 502902; Pleasurecraft; R077002; Volvo Penta; 835440-9; Quicksilver 866340Q03 Oil Filter Installation InstructionsUnscrew old filter and clean mounting base. Be sure old gasket is removed from mounting base; Apply a thin coat of oil to the filter gasket. Make sure the gasket is seated properly in base of the Quicksilver Mercruiser Oil Filter.; Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn; Use an acceptable filter wrench if necessary. Do NOT exceed 1 - 1-1/4 turn; Refill the crankcase and run the engine while checking for leaks; Check oil level;
Specifications
Application | Mercury MerCruiser GM in-line 4-cylinder and 6-cylinder engines; Mercury MerCruiser GM V-8 engines; Mercury MerCruiser GM V-6 and V-8 engines with remote oil filter; Crusader engines |
Brand | Quicksilver |
Compatibility | Mercury/Mercruiser |
Engine Compatibility | Mercury/Mercruiser |
Engine Type | Inboard or inboard/outboard |
Features | Metal shell, durable paint finish, corrosion resistance, over 50% thicker than conventional filters |
Function | Oil filtration |
Ingredients | Oil filter media, metal shell, gasket, paint finish |
Installation | Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn |
Material | Metal, oil filter media, gasket |
Mounting | On the engine block or on a remote oil filter bracket |
Protection | Corrosion resistance, over 50% thicker than conventional filters |
Purpose | To remove contaminants from engine oil |
Recommended Usage | Change after every 100 hours of normal use or minimally once per season |
Size | 35-866340Q03 |
Style | Mercruiser Oil Filter |
Type | Oil Filter |
Water Resistance | Saltwater environments |
Brand Name | Quicksilver |
Item Model Number | 35-866340q03 |
Manufacturer | Quicksilver |
Model Number | 35-866340q03 |
Part Number | 35-866340q03 |